2nd HMDI cable. Ensuring Television is default sound option (SHARP HDMI Audio Output) Ensured NVIDIA Control Panel has SHARP HDMI as audio output. Disabled CPU Audio Sounds in BIOS. Plugged in HDMI through Motherboard, enabling on board audio/video to see if that would work (therefore ruling out issues to ensure targeting the GPU as the audio

Finally called Sharp and they advised that if Directtv Box is connected to Aquos via HDMI, that connection will override HDMI the soundbar. It apparently also overrides Optical Digital Cable as well. I was further advised the solution for connection is from RCA jack at Aquos to 3.5mm pin at Soundbar.

Trying to connect the new laptop to the TV (Panasonic) via HDMI doesn't work. The old laptop, on the other hand, detects the TV as soon as I plug in the HDMI cable and automatically mirrors the display. Troubleshooting: Initially, the new laptop doesn't even recognise the TV has been plugged in.

1. Power down your television and projector. Allow the projector time to cool down if it’s been in use previously. 2. Insert one end of the HDMI cable into the HDMI input port on your projector. 3. Insert the other end of the HDMI cable into the HDMI output port on your television or cable box. ( Please note if you don’t have an HDMI port

1. Select Your Connection Method. HDMI (ARC) HDMI and Optical digital audio cable Optical digital audio cable only. Analog audio cable only Connect another device to your soundbar & TV. 2. After your devices are connected, change the audio output settings. Turn on your TV. Turn on your Sound Bar. On your TV, switch the audio output setting from

Step 1: Turn off your device and then your Vizio TV. Step 2: Unplug all HDMI cables from the TV. Step 3: Unplug your TV’s power from the wall outlet. Step 4: Press and hold the power button on the TV for 30 seconds. This is located on the back of most Vizio TVs, but you may also find it on the side of the TV.

I'm going slightly insane trying to figure this out, and probably never going to bother with Sharp again. The hardware: This all started with a brand new Sharp 70EQ10U TV. I've got HDMI running from a few other devices (WiiU, PS4, Xbox360, and an HTPC) into a receiver, then HDMI out from the receiver to the TV. The problem:

A simple test to check if your HDMI cable is exceeding the distance of your AV system is simply to temporarily move your devices closer together and reconnect the system using (tested!) shorter HDMI cables. If the signal fault has gone, then you need to consider a better quality or high speed HDMI cable. Alternatively, you could try a HDMI

For some, working from home or getting into the gaming industry can make a larger screen a necessity. A Sharp TV can be used as a computer monitor. You will need one of the following to complete the connection: HDMI cable. Screen Mirroring capability. Okay, so you’re set on getting a TV monitor (or using what you already have) for your

1) Raspberry Pi No Display – Check HDMI Configuration. Here, we will change the configuration text file (config.txt) through SSH. Follow the steps below to do that: Connect your Raspberry Pi via SSH. Open the command terminal on the system. Write the line below to open the configuration file in the text editor.

My sharp television HDMI socket is not recognizing the HDMI cord from the Apple TV My Samsung LCD-TV has been working fine for 3 years.

Refer to the TV or monitor manual to understand the type of supported cable to connect. Check the type and speed of the HDMI cable; any mismatch between the two may cause the problem. The different types of HDMI cables available in the market are Standard HDMI:720p/1080p, High-Speed HDMI: Up to 4K, and Ultra-High-Speed HDMI: Up to 10K resolution.

Here’s how to do it: 1. Access the TV’s settings menu: Use your remote control to navigate to the settings menu on your TV. This is typically represented by a gear icon or a similar symbol. 2. Find the input/source settings: Look for an option related to the input or source settings.